[Software Phone] How to Root and Install xRecovery for Gingerbread Xperia X10

First Method

- Download DooMLoRD_v2_ROOT
- Enable Unknown Sources (Menu -> Settings -> Applications -> Unknown Sources) & USB debugging (Menu -> Settings -> Applications -> Development -> USB Debugging) on your Xperia X10.
- Connect your phone to computer with usb cable. (Skip “PC Companion Software” Prompt in your device.)
- Open runme.bat in DooMLoRD_v2_ROOT you just downloaded and Press any key.
- It will root your phone automatically and then phone will reboot.
- You can know your phone already rooted when you see new application named SuperUser in your phone.

Second Method

- Download FlashTool_0.2.9.1-GBready_root
- After downloading just double click on the downloaded file
- it will ask where u want to install/extract, browse to that folder then click on “Extract”
- once its extracted go into that folder and u can now launch Flashtool using X10FlashTool.exe

1. make sure u are on stock 2.3.3 FW
   
2. [ON UR PHONE] enable Unknown Sources & USB debugging in:
   • Menu -> Settings ->Applications -> Unknown Sources
   • Menu -> Settings -> Applications -> Development -> USB Debugging
3. power down device
4. Open the flashtool provided in this thread
5. Flash — Kernel downgrade
   
6. after u see the following remove the USB cable
   
7. DO NOT CLOSE FLASHTOOL
8. remove usb cable
9. Power on device
10. u will feel a small vibration when u power on device at that point immediately connect usbcable
11. when the device starts IT WILL get stuck at SE text logo& u will see the followingin flashtool log/window:
    
12. NOW click root
    
13. and u will see some things getting logged in Flashtool at end u will see the followingoutput
    
14. ur devcie will reboot is done, even IF it doesnt reboot follow the next steps
15. pull out battery and wait for few mins
16. enter flash mode
17. Flash — Kernel upgrade.
    
18. after u see the following remove the USB cable
    
19. Power on your phone and phone will be rooted.
    

How to install xRecovery

1. power on device & get into the OS
2. keep screen active/unlocked!
3. now connect phone to PC via usb cable u will see the following:
   
4. now click “Ask Root Perms” and watch out for Superuser prompt on screen and accept/allow it
   
5. if u accepted/allowed it u will see this:
   
6. now xRecovery button should become “clickable” as show above & click it!
7. now u will see the following in the Flashtool log/window
   
8. THATS IT! u will now have latest xRecovery-0.3-GBready (with all fixes) installed!
9. ប្រភពដើមមកពី:Khnew.com